Inventor Add-insby Shaw Development

Add-on for Millworker · Inventor 2026 and 2027

Veneer Match

The veneer layout your slicer and press need, drawn from the Inventor assembly instead of by hand. Pick panels from your model or add them by hand, and Veneer Match lays them out in a clean 2D CAD layout, ready to align for sequence matching, number and send out.

$29per seat, added to your Millworker licence · perpetual licence

A veneer layout from a kitchen assembly.
Screenshotimg/shots/veneermatch-window.png1600 × 1000 pxThe Veneer Match window with a finished layout: rows of panels either side of the alignment lines, red match symbols, a row label and a flitch header, the bank of symbols on the left.
A veneer layout from a kitchen assembly.

Panels from the model, or by hand

Pick the parts in your Inventor assembly, each coming in at its face size along its marked grain with its name, quantity and grade. Or add panels by hand, with no model at all.

A 2D CAD layout

Every panel drawn to scale on a clean CAD sheet. Snap to edges, middles and guidelines; align, turn, nudge and undo, to set the panels in sequence for the match.

Match symbols

Book, slip, end, pleasing, random, balance, centre and running match symbols, dropped in from the bank and pointing the way the panels are matched.

Flitch numbers and labels

Flitch headers filled in for you, and row labels such as QUARTER CUT and RIFT CUT.

Dimensions and guidelines

Dimensions on every panel, the veneer allowance round every edge with the finished face dashed inside, and alignment guidelines across the rows.

Panel numbering

Number every panel in one click, in the order they are pressed.

Drawing output

A landscape drawing page with your title block, or a layered DWG/DXF for the veneer supplier or the press.

Excel export

The panel list with sizes, grades, flitches and numbers in an Excel workbook, as standard.

Grades both ways

Grades come from the part or the Material Manager, and a grade changed on the layout is written back to the part.

From model to press in four steps

  1. Mark

    Mark grain and set veneers with Millworker.

  2. Pick

    Press Veneer Match and pick the panels in the assembly, or add them by hand.

  3. Match

    Drag them into rows, align them for the sequence match and drop in the match symbols, flitch numbers and labels.

  4. Send

    Number the panels, then print the drawing, export the DWG and send the Excel list.

The printed layout.
Screenshotimg/shots/veneermatch-print.png1600 × 1000 pxThe printed veneer layout page with its title block.
The printed layout.
M

Veneer Match needs Millworker

It reads the panels, grain marks, veneers and grades Millworker keeps in the part files, and its button sits on Millworker's Materials panel. It is added to a Millworker licence for $29 per seat; later it will also be available on its own. About Millworker · Pricing