Inventor Add-insby Shaw Development

Inventor add-in · Inventor 2026 and 2027

Millwork panels, joined, drilled and ready to cut.

Millworker puts more than 40 woodworking tools on one Inventor ribbon tab. Join panels, drill the 32 mm system, cut doors and profiles, assign your shop's materials and print the cut list, all from the model you already have.

Windows · Inventor 2026 and 2027 · inches or millimetres

A cabinet built with Millworker in Autodesk Inventor.
Screenshotimg/shots/millworker-hero.png1600 × 900 pxWhole Inventor window, light theme: a finished kitchen wall cabinet part with dados, dowels, hinge and shelf holes, the Millworker ribbon tab showing and one tool's see-through preview on screen. The best-looking shot on the site.
A cabinet built with Millworker in Autodesk Inventor.

Every tool works the same way

Pick, preview, commit. Learn one tool and you know them all.

Pick

Click the faces and edges the tool asks for. Pick as many joints as you like; click one again to take it back.

Preview

A see-through preview shows every cut and hole before anything changes, even inside a panel, and follows each value as you type.

Commit and edit

Apply makes it as one undo step in a single browser node. Double-click the node any time to open the tool again with its picks and values.

Joins and fasteners

Butt, dado, miter, halving, quirk, tongue and groove

Dowels and cam dowels on the 32 mm system, Confirmat, Domino, biscuits, Clamex P and pocket screws, laid out from the cabinet side's front edge exactly as your CNC drills them. Every hole is dimensioned to the panel, so it follows when a panel changes size.

Cam dowels previewed at a butt joint.
Screenshotimg/shots/millworker-joinery.png1200 × 800 pxClose view of a cabinet corner: Dowels or Cam Dowels previewing red holes at a side/bottom joint, mini toolbar visible.
Cam dowels previewed at a butt joint.
Hinge cups and plate holes, ready for the CNC.
Screenshotimg/shots/millworker-hinges.png1200 × 800 pxA door and side with Hinge Holes previewing cups and plate holes, or a side with rows of shelf holes.
Hinge cups and plate holes, ready for the CNC.

CNC-ready features

Hinges, shelf pins, rabbets, LED channels and profiles

35 mm hinge cups with their plate holes, shelf pin rows on 32 mm, rabbets and stopped dados, dog-eared inside corners for the router, LED channels that meet at the corners, and edge profiles from round-over to your own drawn shapes.

Materials to cut list

Your shop's materials, banding and hardware

A shared material database for sheet goods, edgebands, veneers and finishes. Mark banding, grain and miters, number the parts, place real hardware in every hole and print the cut list and bill of materials, with edgebanding in feet.

The Material Manager beside a cabinet assembly.
Screenshotimg/shots/millworker-materials.png1200 × 800 pxMaterial Manager open beside a cabinet assembly with woodgrain materials and banded edges showing.
The Material Manager beside a cabinet assembly.
The Parameter Manager with a formula.
Screenshotimg/shots/millworker-parameters.png1200 × 800 pxParameter Manager beside a part, the Millworker group open, a formula with its pale yellow value.
The Parameter Manager with a formula.

Parameter driven

No fixed numbers. Ever.

Every size a tool makes is a named parameter in the part's Millworker group. Change the dado depth, the clearance or a door's width, and every feature that uses it follows. The Parameter Manager adds IF/THEN formulas, your own functions, lists, tolerances and Where used.

Built for the way a millwork shop models

Model a cabinet as solid bodies in one part. Millworker joins, drills and shapes those bodies, then takes the assembly through materials, hardware and reports.

Joins

Dado, miter, halving, locking and dado corner quirks, tongue and groove, with clearance built in and CAM corners added where the cutter needs them.

Fasteners

Dowels and cam dowels on the 32 mm system; Confirmat, Domino, biscuit, Clamex P and pocket screws. One pick sequence for all of them.

Features

Panel Maker, rabbets, stop shoulders, edge insets, dog ears, hinge cups and plates, shelf pins, LED channels and edge profiles.

Treatment

Turn a slab into a 5-piece shaker door, slat or flute a panel, split lumps into bodies, copy bodies and keep waste envelopes for rough stock.

Materials

Sheet goods, edgebands, veneers and finishes in a shared database, with woodgrain pictures that follow the panel's grain.

Hardware

Every hole knows what goes in it. Place Hardware puts your screw, dowel, cam or hinge models in place and the BOM counts them.

Panel marking

Click to band edges, mark grain and miters. Marks live in the part files, so every copy carries them to the cut list and the nest.

Reports

Cut list and bill of materials with sheet goods, panels, hardware and edgebanding, saved as PDF or CSV, with a report designer.

Parameters

A Parameter Manager with groups, lists, tolerances, Where used, IF/THEN formulas and your own functions, and a docked side bar with iProperties.

See it before you cut it

Every tool previews in see-through colour drawn on top of the model: red for what is cut away, orange for CAM corners and extras, blue for new bodies. Nothing changes until you Apply, and each Apply is one undo step.

Several dados previewed at once.
Screenshotimg/shots/millworker-preview.png1200 × 800 pxDado Join or Dado Edge previewing several red dados at once on a cabinet, mini toolbar showing.
Several dados previewed at once.
Double-click a node to change it.
Screenshotimg/shots/millworker-reopen.png1200 × 800 pxA Millworker node being double-clicked in the browser and its tool reopened with its picks lit.
Double-click a node to change it.

Change your mind later

Each tool groups what it makes into one node with its icon. Double-click it to open the tool again with its picks found and lit and its values back. Holes are dimensioned to the panel's edges, so a resized panel takes its holes with it.

Works in your units

Inches by default, millimetres with one setting. 32 mm system and metric hardware sizes stay exact either way, and any length can be typed with its unit: 35mm, 1-1/2in.

Every tool on the ribbon

Click a tool to read its page in the Millworker user guide.

The Millworker tab in a part.
Screenshotimg/shots/millworker-ribbon.png1920 × 200 pxThe Millworker ribbon tab in a part, full width, every panel visible.
The Millworker tab in a part.

Settings

Panel Marking

Joins

Fasteners

Features

Treatment

Materials

Hardware

Tools

The Millworker suite

Millworker works on its own. CabinetCAD, NestCAM and Cut List are add-ons: they run on top of Millworker, need a Millworker licence on the same seat, and share its ribbon tab and material database.

Try it on your next job

Ask for the free trial and work through the getting-started guide in your own shop's units.