Millworker Help Printable version
Help / Materials

Tag Layups

Assembly

Put the project's layups on parts with a mini toolbar: choose the layup, click the panels, Apply.

Where

A layup is a core and two faces under one EWC code, for example PAN01 = WUD03 + FIN10 + FIN12. Layups are made in Push to MatFin; Tag Layups puts them on parts, and drawings call them out with the Layup callout.

  1. Click Tag Layups. It reads the project's layups and the mini toolbar comes up, with the layups in a list (code and description; Inventor shortens the one chosen, so it is written out in full beside the list, and the core and faces are spelled out by name on the row under it). Choose None to clear a layup instead.
  2. Click single panels in the assembly (or drag a window over them) to pick them; click a picked one to take it out. Panels selected before you click Tag Layups start picked.
  3. Apply puts the layup on all the picked parts (one undo step) and starts a new pick, for the next layup; change the layup in the list between picks. OK applies and finishes; Cancel or Esc stops.

On the part: the custom iProperties MillworkerLayupCode, MillworkerLayupCore, MillworkerLayupFace1, MillworkerLayupFace2 and MillworkerLayupDescription. The core's material and each face go on with it, so there's no second step: the core's Material Manager material (with no finish of its own), Face 1 and Face 2 each their own veneer, finish or PLAM, found in the Material Manager by the workbook row's SKU (INNERGY code), else its description. Face 1 is the face already veneered as Face 1; else, on a door drilled for hinge cups, the face away from the cups (its front); else the face at the part's +X, +Y or +Z side. A code the Material Manager hasn't got is still put on the part, and the status line names it. Grade on the toolbar puts the chosen panel grade on the parts: A1 puts A in MillworkerFace1Grade and 1 in MillworkerFace2Grade (the grades are in Millworker Settings, General tab, Veneer); with it unticked, the faces take their veneers’ own Grade from the Material Manager. Picked panels light up filled in blue. Save the assembly to keep it all. Locked parts (checked in to Vault, or read-only) are left and named.